The hybrid Integrated Amplifier put on the market as the first phase of the new concept component "Brid series" which an advanced technology and traditional material united
FET which is proud of the thermionic tube and power which were excellent in musicality, and a property is adopted.

A triode is thrown into the pre-driver stage in which the first rank is asked about FET, and high resistance to pressure and a linearity, and MOS FET is supplied to the final stage.
In order to banish electric-current distortion, the voltage control amplifying circuit was adopted over the whole page, and the interference distortion resulting from current amplification is prevented.

The S.T.A.R. circuit is adopted in order to banish the cross interferencee between a circuitry block or a signal path.
This circuitry abolished sharing of an earth line and a feed line currently performed by an old amplifier circuitry being sufficient, is pulling a line from a reference point directly to each circuitry block and a signal path altogether, and has realized the fluence of a smooth signal.

In order to correspond also to an audio-visual apparatus, the input unit of a picture signal is also carried.

Rating of a mode
Form Hybrid Integrated Amplifier
Output power (20Hz - 20kHz) 105W+105W (6ohms)
THD 0.008% or less (6 ohms, 1kHz)
Frequency characteristic 1Hz - 200kHz-less than 3dB
Input sensitivity/impedance Phono man month: 2.5mV/47kohm
Phono MC: 125 microvolts/100 ohms
compact disk, Tuner, audio video/AUX:150mV/40kohm
S/N ratio (A curve correction) Phono MM:90dB
Phono MC:70dB
compact disk, Tuner, audio video/AUX:110dB
audio-video input terminal Three lines
audio-video dubbing functionality audio-video2->audio-video1
Supply voltage AC100V, 50Hz/60Hz
Dimensions Width 438x height 148x depth of 346mm
Weight 10.6kg

http://www.thevintageknob.org/LUXMAN/LV105/LV105.html

http://audio-database.com/LUXMANALPINE-LUXMAN/amp/lv-105-e.html

$ 350 or best offer